HANDOUTS
Edit set
What?
What is the name of the set?
Description (optional):
<p>If you know the <a href="https://www.dgmfmoldclamps.com/30-two-color-injection-molding-technical/">30 technical information on the two-color injection molding</a>, the <a href="https://www.dgmfmoldclamps.com/injection-mold-components/">injection molding</a> process will be done in helpful.</p> <p>The mold embryo guide pillar <a href="https://www.dgmfmoldclamps.com/guide-pins/">guide pin</a> must be symmetrical up and down, left and right, and front and rear mold symmetry.</p> <p>Two independent ejector systems, the top stick is also two. After the mold two products are the same, the <a href="https://www.dgmfmoldclamps.com/product/straight-ejector-pins/">ejector pin</a> is the same, is a rotary relationship, do not make a translation relationship.</p> <p>The ejector plate can only be reset by <a href="https://www.dgmfmoldclamps.com/springs/">spring</a>, not by screw forced reset because the back mold rotates.</p> <p>The <a href="https://www.dgmfmoldclamps.com/product/parting-line-component-side-lock/">side lock</a> must be in the center of the mold on all sides, and the front and back of the mold symmetry, otherwise when the back of the mold rotation 180 and the front of the mold can not be.</p> <p>It is a two-color mold embryo, the four guide pillar <a href="https://www.dgmfmoldclamps.com/mold-guide-bush-component-guide-bushing/">guide bush</a> and the frame is symmetrical, and the rear mold can match with the front mold after rotating 180 degrees.</p> <p>The depth of the front side sprue should not exceed 65mm. the distance from the top of the upper side <a href="https://www.dgmfmoldclamps.com/product/large-gate-sprue-bushings/">(big water outlet) sprue</a> to the center of the mold embryo should not be less than 150mm.</p>