HANDOUTS
Edit set
What?
What is the name of the set?
Description (optional):
<p><a href="https://www.dgmfmoldclamps.com/185-injection-moulding-die-design-experiences/">185 injection moulding die design experiences</a> are precious information! Worth collecting.</p> <p>1. The height of the slider <a href="https://www.dgmfmoldclamps.com/guide-components/">guide</a> should be at least 1/3 of the slider height to ensure the stability of the slider and smooth sliding.</p> <p>Made of <a href="https://www.dgmfmoldclamps.com/springs/">spring</a> steel.</p> <p>21. In order to make sure that the <a href="https://www.dgmfmoldclamps.com/product/straight-ejector-pins/">ejector pin</a> and <a href="https://www.dgmfmoldclamps.com/product/shoulder-ejector-pins/">tilt pin</a> of the mold are reset, some molds are equipped with an early return mechanism (female on board 108 and male on board 102, the male is similar to the ejector pin, the bottom is blocked with headless <a href="https://www.dgmfmoldclamps.com/fasteners/">screws</a>.</p> <p>61. For parts that are difficult to take out during mold assembly, such as pressure <a href="https://www.dgmfmoldclamps.com/positioning-components/">blocks</a>, runner plates with small spouts, mold kernels, etc., it is necessary to drill holes for lifting screws; however, sometimes, for the sake of simplicity, the two <a href="https://www.dgmfmoldclamps.com/mold-clamps/">clamping</a> screw holes on the opposite corners can be drilled through and tapped through to screw the lifting screws.</p>